sir my masters project is on mitigating route requests based on reputation.......i.e all the nodes have to send rreq packets. they wil have to send it through their one hop neighbor and their one hop neighbor will take into account the no. of rreq sent to the no. of rrep received which will give the reputation of the node and on the basis of this the node will be allowed to send a certain proportion of the data to its actual capability.

now i have studied ns2 and can write tcl codes. but cant understand how to do this sort of work..........plzzzz help.

how to add malicious node in wireless node using Aodv routing protocols

Sir, can i generate tcl script for 802.15.4 AOMDV routing protocol?

Hi sir

this is chandra sekhar . now i am learning tcl script can please give me any materials......

Hi sir

this is chandra sekhar . now i am learning tcl script can please give me any materials......this is mail id : chandrabec@gmail.com

Hello sir, am doing "Cache Invalidation in Wireless Networks" as my final year project.. So I want to add a parameter CACHE in each node. Is it possible in NSG?? If yes how?? Or else suggest me other tools to do this..

Thanks in advance

Good after noon sir,
I am working on goodput based performance analysis of tcp variants under various scenario of AODV(Normal aodv,Grayhole attack in aodv,blackhole attack in AODV,secure AODV) i just want simple tcl scripts of 20 nodes with AODV as protocol and Tcp reno as agent with CBR traffic

Hi,
Can you help me that how i will include node mobility in 802.15.4 using ns-2.34.
Javed

sir,

i m doing dissertition on design strategies of aodv implementation.
i have to do aodv-uu and aodv-ucsb
i got problem in installation of aodv.
can u help me regarding it....

Respected Sir,
As a part of project work i need to implement Flood Rushing attack with AODV protocol in NS2.34.

I am new to NS2 and need to implement Flood Rushing Attack. I had already implemented Black hole attack.
But for implementing Flood Rushing attack what kind of modification i need to do in aodv.cc and aodv.h.
I had tried to implement but trapped with error.

Expecting helpful reply.

Hi sir,

i want load balancing routing protocol patches (like...LARA,LBR,LBAODV).please provide me.

Hai Sir,
I am using NS-2.31,am unable to patch PUMA protocol. Can you please help in patching PUMA protocol. And also i need your help in patching MAODV and ODMRP protocols in NS-2.31.

Thanks in Advance!!!

Respected Sir,
I am working on project "A Novel Approach for GrayHole and BlackHole Attacks in Mobile Ad-hoc Networks"
Can you please suggest me the TCL script for it and necessary changes which i have to make in Routing protocol (I am using AODV).
Thanks in advance.

sir can i create flooding attack using this tool.....

sir can i create flooding attack using this NSG

Dear Sir,
I encounter "Unknown source error" and can't run NSG2.1 jar and also NSG2.jar on Ubuntu 12.10. My java version is 1.7 and I tried as the way you said in above comment by running java application. But, it still doesn't work. How to fix this error. Please let me know.Sir.

hello sir i am weorking on tora protocol for node energy conservation but
i have problem to find the proper value of it so plz help me to how i write tora tcl script

MOHIT SIR, I NEED .AWK SCRIPT FOR NORMALIZED RESIDUAL ENERGY, NORMALIZED NETWORK LIFETIME, NORMALIZED ENERGY EFFICIENCY. PLEASE MENTION THE PATH.

Hai sir..i am dng project in "link repair in manents" by choosing alternate path... I found the code 4 alternate path.. am using a formula 2 find out the link repair in prior.. Nw i need to link this code with my alternate route finding code so that if their is any repair gonna occur it will choose the alternate path without dropping the pckts.. can u plz help me???

hello sir,
i'm doing my final year prj on selective jamming in ns2. i'm planning to demonstrate jamming based on req-resp scheme and thn route the pckts to dest using AODV protocol. is this feasible? hw to go abt it?

Thank u sir for this blog..

It s too useful...

Hello, sir. Our project is to compare 4 of the Ad-Hoc routing protocols and find out the best one. How do I find out the bandwidth us by the nodes in each protocol?



Regards,
Aryamita Dhar

Sir, I am Vinay....from RVCE,
Can you please suggest any document to refer to implement wireless scenarios(such as node movement and congestion control).

Dear sir,
please give me help for build up the DOS attack.
if any Tcl script is Required?

Sir I have implemented new AODV protocol name like SelfishAODV. Plese If you have ready code plese send me because some error are not solve for me.

Please help me sir

sir i am new at ns2 and nsg....a can not create agent file detail in tcl file using nsg...so sir plz give me some guid line to create tcl file using nsg....m very confusing ryt now in my project...help me out

hi
can we add energy levels with node in NSG2.1

can we do clustering in NSG2.1

thanks

Sir this is really a great tool i must say...
I'm doing a project on cluster formation in WSN for energy saving purpose, how can i form a clustered network based on distance using this tool?

Hi.... can i know how to find the shortest path in the network using NS2 ? Is there any TCL script exists for that already?

Hello Sir .... how to solve the problem of shortest path in wired network using NS 2? Is there any TCL script exists for that ?

I am doing my thesis on Qos aware mac for voice transmission over adhoc network (in 802.11b).

I have been following your blog & it has been a great help,rather the only help for ns2.

I want to implement pcf over dcf for Qos aware dual mac for transmission of high priority data.

First to create two separate channels for best effort & high priority data

then to implement next hop selection algorithm.

I just want the guidance about the ns directory.

What files in ns2 directory I should modify to achieve the required results.

Thanks in advance

I am making performance analysis between DCCP , TFRC and TCP.I don't know haw to simulate them in the same topology script tcl . Can you help me Please .
Thanks

hi

problem getting in installation of ns2.

ns2.34 installing on Ubuntu 11.10,error tk3.8.18 fetal error getting,

what should i do

sir ..i m doing project in ns 2 ...to compare various parameter like bandwidhth delay and throughput ...in node tree(15)...sir plss send the tcl script for creating this scenerio

sir my id is yadavambar22@gmail.com

hello sir,
your codes are really very helpful for me..sir will u plz tell me how can i generate ddos attack using tcl script...

sir i need tcl script for tree construction of sensor nodes

sir
i want tcl scripts of qos multicast routing protocols -qmbf n qroute .........can u plz tell me the link from where i can get them .........is it possible to generate these on nsg2 n how

hello is i installed jre 7u17 in linux,but its not showing jar file.
Can u tell me how to lunch NSG in linux redhat environment.

Hi! am new to ns2 and would like to implement security algorithms such as AES,RC5,
How do I go about it?

Hi,
Can anty budy help in getting OMLRP ROUTING CODE IN NS2

Hello sir,
I am doing my master's project in ns-2.my project is to analysis and comparison of aodv,dsr and dsdv over different mobility models. Could you plz provide me tcl and awk scripts for the same as mentioned above.

Thanks.

sir i am working on cross layer techniques for security in manets. can you provide me some help in tcl code and idea in implementation of it

I want to implement the geographical routing protocol evaluation and comparison. Is there any TCl code for implementation or how it will be implemented in using NS-2

sir I want to install antnet patch for my NS 2.35 where can i get the patch and how to install it. i have ubuntu 10 as OS

Hello Mohit sir,

From where i can get wormhole attack implementation code and also about its detection. Please help me to implement this.

Thanks in advance.

hello sir..i am working on wireless sensor networks.
i want to simulate HEED and LEACH protocol for clustering in wireless sensor networks...please help me out....

regards
ankit sharma
ankitcse.engg07@gmail.com

Dear Mohit P:
Sir Im executing DSR over dynamic topologies, the simulation completes successfully but got the segmentation fault at the end. plz give me hints regarding this problems

hi i am ns2 beginner.i have question about that we have to implement the dsr ,dsdv etc in ns2 or it is inbuilt in ns2. mail manoj04418@yahoo.com

by just double clicking on the jar file it didnt work... i hav to give java -jar option.. why should it like that...?

Hi sir
I want similar software, for wsn cant generate .nam file too...
can you help me?
with regards :)

hello sir.. I m working on ns 2.34 regarding mobility models based performance analysis of AODV... i m using hound packets to avoid wormhole attack in it.. plzz tell me about its simulation and source code...

hello... I m working on NS2.34 simulator.. plzz send me source code or cc patches of WHOP protocol in MANETs...plzz as soon as possible on gurmeetpatil@gmail.com

Hi,

I am looking for the GEAR protocol of NS2 tcl and other files, if you have any reference links, could you please suggest me, where can i get it through??.

Thanks for your help in advance.

Best Regards,
KSR.

hi sir,
My project is to make degraded voice files using ns2..can you please help with this..can u plz let me no how to go about with t as i am a beginner in ns2. can u plz help me to write a code to test voice files on NS2.

Hello Sir,

Can you please provide me the tcl script for "Simulation of Congestion controlling in a private cloud using NS2"

Hello Sir,

Can you please provide me the tcl script for "Simulation of Congestion controlling in a private cloud using NS2"

Sir, My project is on cognitive radio and can I implement in NSG? my system architecture is relay station in cognitive radio network can I simulate using NSG

Sir. Today workshop was very beneficial to us.
Thank you.

Hello sir,
pls help me , i have to implement the aodv routing protocol in vanat using ns2... i my implementation i have to show the performance of aodv in vanet.. so pls help me hw can i implement aodv in vanet using ns2.. i will be very thankful if u can help me... pls pls help...

Hello sir, i want to implement the aodv routing protocol in vanet using ns2... pls help me hw can i do this.. pls sir help me i am in a great need... reply me pls gagandeep.engineer@gmail.com...

how to run tcl scripts in nsg2 ( java 1.6 ) sir .. any other files required for this..? i am having java 1.6 and nsg2 .. how to run the tcl scripts?.. plz help sir..

common/packet.cc : In static member function 'static int p_info::addPacket(char*); common/packet.cc:54:13:error : assignment of read-only variable 'PT_NTYPE' make : *** [common/packet.o] error

i get this error wen changes were made for a new protocol and after making changes until makefile .. i run the command " touch common/packet.cc " its compiling.. but wen i run the command "make" the above error occurs.. kindly can anyone help me..

hello sir m new in antnet, my installation give error in priqueue.cc file
queue/priqueue.cc: In member function ‘virtual void PriQueue::recv(Packet*, Handler*)’:
queue/priqueue.cc:93:22: error: ‘PT_ANT’ cannot appear in a constant-expression
make: *** [queue/priqueue.o] Error 1
[root@fedoravm ns-2.34]# make install


sir plz help me its urgent how remove this error . my email id is sofat.smriti@gmail.com

Sir i want ask about NSG, in this current setting using default 802.11b. can i configure by self to 802.11p spec ? can u give me some tutorial about it ?

Hello Mohit Sir,

Myself is Pawan. I am currently working on Machine to Machine communications and want to implement its system model on ns-2, for which I am using this NSG 2.1 tcl code generator. I dont know how can I change the channel characteristics to modify the transmission range of a particular node keeping all the characteristics unaffected for remaining nodes.

Could you please help me on this.

Thanks,

please I want to generate scenario in ns2 but when I reach to step of setsest the error appear is" there is syntax errors unexpected ")" can any one help me please? this is my email gh961@yahoo.com or ghaydaaa7@gmail.com

sir,,,
i am doing an IEEE project in "Tour planning for mobile data gathering in wireless sensor networks".kindly help me to my project in NS2....pls help me by providing codes related to this project..thank u..

Hi Sir,
Can u mail me the CA-AOMDV patch for ns2.34? or pls give some idea to create that patch file sir

Can I have a manual about this tool in English because on the website, it is in Chinese only?

sir, I created wireless scenario for 100 nodes using nsg and run it in the ns2. I tried to give color to the nodes in that tcl script but errors comming...sir plz help me to solve the problem

Hello Mohit Sir
I attended your workshop.. that was very useful.
I need to enhance security in routing protocols..how can I add encryption and decryption procedure in NS2 of AODV.cc.then how to run the tcl scripts

Sir it will be helpful if you can tell the steps for labeling the nodes.

Hi Mohit sir,am doing my project on reputation based protocol namely COSR. Can you help me with tcl script sir pls?

Sir,
I need to simulate the topology which is on this link:
https://picasaweb.google.com/118326369766248888803/Topo?authuser=0&feat=directlink

I don't know how to set hierarchical topology addresstype parameters i.e., number of domains, number of clusters in each domain,number of nodes in each cluster

$ns_ node-config -addressType hierarchical
AddrParams set domain_num_ ??? ;# number of domains
lappend cluster_num ????????? ;# number of clusters in each domain
AddrParams set cluster_num_ $cluster_num
lappend eilastlevel ??????????? ;# number of nodes in each cluster

please help me to set all these for the topology which I shown in picture.

unable to add the agent definition in wireless scenario

can i use NSG to generate cisco based scripts

Sir,
Kindly help me to find the adjacency matrix of the wireless network in ns2

Preetha

sir ,
when i implement taheo in nsg2 throughput is zero

Hello sir. I have done a project on ZRP & now I want to go for multicastng in ZRP. Could you please advice me on how to implement multicasting in my code? Thankyou

Hi,
while running cbr over tcp in aodv, i got this type of message. Classfier::no-slot{} default handler (tcl/lib/ns-lib.tcl) ---
_o15: no target for slot -1
_o15 type: Classifier/Hash/Dest
content dump:
classifier _o15
0 offset
0 shift
1073741823 mask
1 slots
slot 1: _o30 (Classifier/Port)
-1 default
---------- Finished standard no-slot{} default handler ----------
what may be the problem????
thanks in advance....

Hi,
while running cbr over tcp in ns2 using aodv, i got the following error meaasge.
Classfier::no-slot{} default handler (tcl/lib/ns-lib.tcl) ---
_o15: no target for slot -1
_o15 type: Classifier/Hash/Dest
content dump:
classifier _o15
0 offset
0 shift
1073741823 mask
1 slots
slot 1: _o30 (Classifier/Port)
-1 default
---------- Finished standard no-slot{} default handler ----------

what would be the cause and how to recover this?pls help me.
thanks
dilip

sir,
i am currently working in cluster concepts.... is there any efficient clustering algorithm patch work... am not sure which clustering algorithm to prefer.... and is there any existing patch work for clustering concept in ns2...please do reply sir.... waiting for your response....

Sir;
I am doing a project based on paper "a secure protocol for spontaneous wireless adhoc network creation" ,,,,in this we have to use a trusted node base routing protocol..Can u help me to do the same??

sir

what is the fittness function for routing in Manets....means how to get the routes from source from to destination....for AODV and DSR routing protocols

Hello Sir, we are doing a project named "Artificial Immune System For Routing Protocols In MANET". We are using ns2 as network simulator.Our project guide suggested us to compare two trace files, first will be obtained by running normal tcl script of 20 nodes ..The second one will be obtained by running a tcl script containing an attack(eg. blackhole or wormhole).But the problem is we are not getting the exact idea about how to implement it or how to write any attack in tcl. Can u suggest some steps so that we can follow them and understand it in a better way.

Sir, I am a final year engineering student. My team is working on a project of analyzing various variants of TCP in Manet. For that we have to analyze the packet delivery and other factors. But sir we are facing a problem of how to code variants using cbrgen in ns 2.35 and also in adding error model in wireless network. Please need your guidence.

sir I am PG student i m developing project "handling selfishness in replica allocation over manet" I made connectivity with AODV but i cant understand how to detect node as selfish or not? can u give me d idea for it?


regards,
Madhuri Mane
madhuri.d.mane@gmail.com

hello sir....in MANETS how node selectes next neighbour node among many nodes in network.

sir....what is the fittness function used for routing in AODV protocol in mobile adhoc network ...please answer me to this question

Dear Mohit, I have implemented Byzantine Wormhole attack in NS2, can you suggest me some possible solution for byzantine wormhole detection and removal. I am using DSR based OCEAN protocol. Help me out. Thanks in advance.

Hello sir, can u suggest me that is it possible to Public Key Certificate as CA is generated by NSG. Reply my id- misra.deven@gmail.com

@Sandeep Sandhu - After generating the traffic files using cbrgen - you will have to manually configure TCP variants.

Regarding error model, the following link may help you:

http://www.winlab.rutgers.edu/~zhibinwu/html/NS_examp.html#Example_3

@Madhuri Mane - You will have to introduce selfishness in the node yourself. By default, nodes in ns-2 won't behave in a selfish manner.

@Shwetha Shwethu - AODV uses "hop count" as a routing metric i.e., in your words - hop count is the fitness function used in AODV.

@Network - I have not worked on that area much, so at this time point cannot provide any solution for that. However, I would encourage you to share your byzantine attack code of ns-2 with other users of ns-2 either by putting it on your blog or anywhere else.

@Devu - No, it is not possible to do that using NSG!

Hope it helps.

Regards,
Mohit P. Tahiliani

mahesh.patil37@gmail.com
hi sir i am present in islampur RIT workshop
I have doubt about IDS sensor node Optimization in NS-2 simulation

sir
i am working on jamming attack in wireless sensor network. i want to implement it in ns2 . kindly help me regarding this. if you are having any code regarding this kindly provide it to me

hello sir. how to proceed with applying genetic algorithm in ns2 for AODV routing protocol ? any reference to help about simulation procedure.

Hi Mohit.
I have to implement AODV,DSDV and Swarm bee routing protocols for VANETS and compare all three of them. I got the code for AODV and DSDV.
Can u please provide me the code for swarm bee routing protocol.
Thanks in advance

hi Mohit.
I have to implement AODV,DSDV and Swarm bee routing protocols for vanets and compare all three of them.
I got the code for AODV and DSDV.
Please provide me the code for Swarm bee routing protocol for vanets

Please provide me the TCL code for Swarm bee routing protocols in vanets.

@Sowmya - Unfortunately, I do not have any such code with me. Please try your luck by searching through other websites.

Regards,
Mohit P. Tahiliani

Dear Sir,
I am final year engg. student & doing final year project on
"performance and analysis of zone routing protocol using NS2".

please send me related information of zrp & code on this above titles
and performance with other types such as proactive & reactive .
send me some details about this project.
Thanking you ..

hi Sir,.
I have to implement AODV,DSDV and ZONE routing protocols(ZRP) for MANETs and compare all three of them.
I got the code for AODV and DSDV.
Please provide me the code for Zone routing protocol for Manets.

@Shivm Narwade - There is no such ready made code available! Try to install ZRP patch separately because it does not come within the default package of ns-2.

After you are done with ZRP patching, use the steps given on the following link to compare the protocols:

http://csie.nqu.edu.tw/smallko/ns2_old/adhoc_routing.htm

Hope it helps.

Regards,
Mohit P. Tahiliani

Hello Sir provide me tcl script of AODV for VANET environment.

my id richagoyal323@gmail.com

@Richa - TCL script structure remains same whether it is a MANET or a VANET. Try following things:

1. Use some example TCL scripts given in ns-allinone-2.xx/ns-2.xx/tcl/ex folder which have mobility scenarios.

2. Use Bonnmotion tool to generate your mobility pattern (http://mohittahiliani.blogspot.in/2010/04/mobility-models-for-ns-2.html)

3. Use SUMO or MOVE to generate your mobility pattern (http://www.dlr.de/ts/en/desktopdefault.aspx/tabid-9883/16931_read-41000/).

Hope it helps.

Regards,
Mohit P. Tahiliani

hello sir
will u explain me one tcl of NCMR protocol file that i hav?

set val(x) 500 ;
set val(y) 500 ;
set val(nn) 101 ;
set val(end) 200.0 ;
set val(routing) ENCMR;
set val(energymodel) EnergyModel ;
set val(initialenergy) 100 ;# Initial energy in Joules
set ns_ [new Simulator]

set CST 3.652e-8 ;#250

Phy/WirelessPhy set CPThresh_ 10.0
Phy/WirelessPhy set CSThresh_ $CST
Phy/WirelessPhy set RXThresh_ $CST

set BER 10e-3
set SER 0.0

Agent set interval 0.1
Agent set N_path 3
Agent set BER $BER
Agent set SER $SER
Agent set H 5
Agent set K 4
Phy/WirelessPhy set BER $BER
Phy/WirelessPhy set SER $SER

set topo [new Topography]
$topo load_flatgrid $val(x) $val(y)

set t [open out.tr w]
$ns_ trace-all $t
$ns_ use-newtrace

set nt [open out.nam w]
$ns_ namtrace-all-wireless $nt $val(x) $val(y)

set god_ [create-god $val(nn)]

$ns_ node-config -adhocRouting $val(routing)\
-llType LL \
-macType Mac/802_11 \
-ifqType Queue/DropTail/PriQueue \
-ifqLen 50 \
-antType Antenna/OmniAntenna \
-propType Propagation/TwoRayGround \
-phyType Phy/WirelessPhy \
-channelType Channel/WirelessChannel \
-topoInstance $topo \
-energyModel $val(energymodel) \
-rxPower 0.05 \
-txPower 0.1 \
-initialEnergy $val(initialenergy) \
-agentTrace ON \
-routerTrace ON \
-macTrace OFF

for {set i 0 } {$i < $val(nn) } { incr i } {
set node_($i) [$ns_ node]
set ragent_($i) [$node_($i) set ragent_]
}

source scen_100.tcl

$ragent_(0) set BS_ 1

$ns_ initial_node_pos $node_(0) 20

for {set i 1 } {$i < $val(nn) } { incr i } {
$ns_ initial_node_pos $node_($i) 10
}

puts "Starting Simulation..."

set SENSE [new Agent/ENVIRONMENT]

for {set i 1} {$i < $val(nn) } {incr i} {
$SENSE get_sensor $ragent_($i) $i
}

#$SENSE get_sensor $ragent_(87) 87

$ns_ at 35.0 "$SENSE begin_sense"

set null_(1) [new Agent/Null]
$ns_ attach-agent $node_(0) $null_(1)

$ns_ at 190.0 "$SENSE stop_sense"

$ns_ at $val(end).0000001 "$node_(0) reset";
$ns_ at $val(end).000001 "$ns_ halt; exit 0"
$ns_ run

@Anvika - This TCL is quite similar to any other TCL script. For explanation about each line - refer to Marc Greis tutorial, Section IX.

Hope it helps.

Regards,
Mohit P. Tahiliani

Sir i have a tcl sript of my project.. can i modify it using this tool ??

@Aavi - No, you cannot modify an existing TCL Script with NSG.

Hope it helps.

Regards,
Mohit P. Tahiliani

Hello Mohit sir,
Can you please tell me how I can generate tcl script for hop count in Wireless Mesh Network from source to destination by using NSG2.1 ??
Else in writing tcl script. If you have any type of relevant code for hop count that will be so helpful for me. I really in need of that. Please help me out from this.

Looking forward to your response.

Thank you sir
Regards,
prami

Hello Mohit,
I am M. tech student frm Goa and looking out for help to implement WSN node authentication protocol..using ECDSA algorithm.
i have no idea how to write tcl and implement on NS2... please guide me to how to proceed further to implement above in wireless sensor network!!


Awaiting for earliest reply


Varsha

@Varsha - The best way to start learning TCL is to go through Marc Greis tutorial thoroughly. To simulate WSN in ns-2, either use NRLSensorSim or Mannasim. Just to let your know, NRLSensorsim gives 14 sample TCL scripts for simulation and Mannasim gives a TCL generator by which you can generate TCL script for WSNs.

Hope it helps.

Regards,
Mohit P. Tahiliani

sir can u please help me on how to modify existing aodv protocol or patches available for modified protocol

sir please provide me spin protocol, flooding, DRUG protocol tcl script for my project...thank you sir ..
email id: agrawalashish_01@yahoo.com

Hello sir @MohitP i'm working on ubuntu 14.04 and NS2.35. when i run java -jar NSG2.1.jar i have this error :
Exception in thread "main" java.awt.HeadlessException
at java.awt.GraphicsEnvironment.checkHeadless(GraphicsEnvironment.java:207)
at java.awt.Window.(Window.java:535)
at java.awt.Frame.(Frame.java:420)
at javax.swing.JFrame.(JFrame.java:218)
at nsg.NSG2.(NSG2.java:57)
at nsg.NSG2.main(NSG2.java:297)
and i think that's th broblem is on the graphics libraries. i have Run the following command to install a JDK that has these libraries:sudo apt-get install openjdk-6-jdk
also when i run java -version the result is :
java version "1.7.0_121"
OpenJDK Runtime Environment (IcedTea 2.6.8) (7u121-2.6.8-1ubuntu0.14.04.3)
OpenJDK 64-Bit Server VM (build 24.121-b00, mixed mode)
so i do not know what to do to fix this problem so please can you help me
thank you ;

sir,
Using mannasim patch in ns2.35, I have created a TCL file which creates s clustered WSN scenario which senses temperature. Could u please tell me how to make a particular node to sense abnormal temperatures?

Hello Sir , i am doing proj in Clustering technique for vanet environment, i m searching the sample code for basic cluster formation and clusterhead selection, plz help me,,

Sir
I want to patch ANTHOCNET routing protocols in ns2.34.
plz tell the steps needed to edit before makefile as I am not aware that where the changes need to be done in ns2.34.
plz guide.

can i use NSG to create clustered Wireless Scenario?

hi sir.sir i am doing peagasis and tree based routing protocals in ns2.35.
my doubt is can i generate tcl script for pegasis and tree based routing protocal using routing type as aodv. can i give node connection according to pegasis and route type as aodv without modifying .cc and .h files

plese send tcl script for pegasis and tree routing pritical

hi sir.sir i am doing peagasis and tree based routing protocals in ns2.35.
my doubt is can i generate tcl script for pegasis and tree based routing protocal using routing type as aodv. can i give node connection according to pegasis and route type as aodv without modifying .cc and .h files

hi
How do we set up the mac802.11 protocol in Wired network using NSG2.1
Regards

Hi Mohit Sir,

I m doing a project on "Video transmission over Wlan using ERED-FEC Mechanism" but i m unable to transmit video from source node to receiver node (mobile nodes). Can you please me on this?